|
Body Art With Liquid Latex |
By:
Bunnie |
|
|
Body Art With Liquid Latex
Bunnie
The practice of body painting is as old as history itself. This practice has been used for the purposes from warding off enemies during times of war or conflict to changing appearances for stage or film performances.
In the past fifty years or so liquid latex has found it's way into the bags of makeup artists in order to create looks from sensual to sublime for film. The use of liquid latex today is commonplace with everyday people that practice the art of body painting. This fluid like material can be painted directly onto a model's skin. Complete outfits that can be worn in public can be produced with the use of liquid latex.
I've listed below a some tips to aid in using liquid latex for bodypainting.
One of the first thing you must consider is latex allergies. Many people are allergic to latex products and therefor it is important to make sure the person being painted doesn't have any type of allergic reaction to the latex. Start by painting a small area of the model's skin and allow it to dry for several hours. When removing the test patch look for reddening or skin irritation before proceding. Slight itching is sometimes normal due to skin breathing under the latex but if the itching or skin irritation becomes persistant stop and remove it immediately.
As with any type of paint material, liquid latex will stick to almost anything. Bear this in mind when setting up to use it. The painter should wear old clothes and the area where you intend to paint should be protected with a drop cloth or painter's cloth to make sure you don't make a mess on something you don't want painted.
As liquid latex begins to dry it will make the model feel cold so it's a good idea to make sure the room your using is warm and ventilated. Liquid latex has a small amount of amonia and sulfur in it so it is also a good idea to open the container and let it breath for a little while before applying it.
Dealing with body hair is also something to think about. The best method is to shave or trim the area with the body hair that will be painted. If shaving or trimming isn't an option then apply a liberal amount of skin lotion, any type pretty much will do, and allow it to saturate the skin before beginning. The use of skin lotion will also aid in removal of the latex after it dries. If the model intends to wear the liquid latex for an extended period of time the lotion won't necessarily be needed for removal because as the skin perspires it will help loosen the latex coating.
Liquid latex can be applied just like paint. For large areas you can use up to a three inch painter's brush and for smaller areas you might want to consider using a smaller foam brush. Apply the liquid latex in even coats over any areas you wish to paint and allow it to completely dry before applying additional coats. Hair dryers work well in speeding up the drying process for the latex. Typically three or more coats are used for full and complete coverage and these coats can be done in different colors if desired. Also make sure as you apply the liquid latex that none of the body parts being painted touch each other as the latex will stick to itself and rip when your model moves.
Following some simple rules will ensure safe use of the liquid latex:
* Use the liquid latex in a well ventilated area * Never apply liquid latex close to the eyes * Keep out of the reach of children * Do not use if the model has hypersensitive skin or is allergic to latex,rubber or sulfur * Never apply liquid latex to any type of open wound
Fetishwear.bz sells a large selection of fetish wear, fetish toys and gear, bondage related gear and adult toys and novelties. If you looking for something to spice things up check us out
|
|
Article Source: http://www.statssheet.com/articles/article67742.html |
|
|
|
|
|
