|
Airbrush Art Preparation And Reviews |
By:
Goodness Maseko |
|
|
Airbrush Art Preparation and Reviews
Goodness Maseko
For leather preparations, the leather needs to be wiped down with rubbing alcohol prior to doing any airbrushing. This will remove the oil that is on the leather. The oil will prevent the paint from sticking to the surface. Make sure that all the leather has been wiped down and that the alcohol has dried before beginning. When you begin you need to place a base coat of Opaque White first before you begin your actual airbrush design.
Wood surfaces should be sanded prior to doing any airbrush art. Take the time to use sand paper and lightly sand the wood down by hand. If you are doing a mural on a wood floor then use a hand floor sander. You don't want to mar the wood only remove any rough areas. If the wood has been waxed or has a gloss coat then sanding this will remove this and allow for the paint to stick to the surface.
The better care that you take of your airbrush the longer it will last. So keep your airbrush clean with the right cleaners and once a month do a full break down and cleaning. With needles most artist find that the airbrushes coming out of China bend easier than any of the other airbrushes. So look for one that is made elsewhere so that you do not have to keep trying to straighten a bend airbrush. The best airbrushes to use that are the easiest to take care of are name brand airbrushes. The knockoffs are harder to take care of because are made from cheaper parts that break easier than the name brands.
Basic airbrush parts
If your airbrush is internal mix then it will have a needle. The purpose of the needle is to control the paint flow. Any damage to your needle can cause very bad paint spray patterns. It is important to keep your needle from getting bend and either straightening the needle or replacing the needle.
Pay special attention to the threads on your airbrush. The threads are located on the head assembly and where the air hose connects to your airbrush. If these threads should ever become cross-threaded then you could end up with an air leak. An air leak will effect the function of your airbrush so make sure to take care not to cause any cross-threading in these areas.
Airbrush makeup art
So with everything being available for artist to use as a canvas for their airbrush art and with art being the taking of something and then turning it into a masterpiece, there is now a question posed. Is airbrush makeup just another form of airbrush art? Can the application of makeup with the use of an airbrush be art? Or is it still just the application of makeup that just happens to use an airbrush?
Those that apply make up are considered artists and airbrushing on makeup is just another great way that they have found to show off their artistic median. The make up goes on water and has to dry. As it dries those watching can see the transformation of the subject from what she was to what she is now becoming. This is why a lot of people do believe that airbrush makeup is another form of airbrush art.
Let's get more fun, games and entertainment by visiting the following website:http://fun-and-entertainment.information-guide.org/ fun and entertainment information guide your online http://fun-and-entertainment.information-guide.org/ family entertainment center. This article is available as a http://www.uberarticles.com/?id=15726&b=79 unique content article with free reprint rights.
|
|
Article Source: http://www.statssheet.com/articles/article61010.html |
|
|
|
|
|
